Quick Answer: Trotec is a 29-year-old (founded 1997) Austrian laser-engraving brand with a strong reputation — 4.5/5 on Trustpilot from 117 reviews — and a lineup running from the Speedy 100 (from about $12,995) up to the flagship Speedy 400 (from about $50,490). It is not sold on Amazon — purchases go through Trotec’s own regional offices or authorized dealers, though Amazon does stock Trotec’s TroLase engraving sheets — and it has zero LightBurn support, not even a workaround path, unlike every other brand this site covers. If you’re comparing Trotec against a hobbyist machine on price, you’re in the wrong bracket; the Amazon-buyable alternatives below cover the same ground for a fraction of the cost.
Trotec comes up often in laser-engraver research because of its reputation, not its accessibility — it’s an Austrian industrial manufacturer that’s been building CO2 and fiber systems since 1997, when it split off from parent company Trodat’s own R&D lab. Unlike the diode and desktop-CO2 brands that fill this site’s roundups, Trotec sells exclusively through its own sales network, and its software story has a real gap most buyers don’t find out about until after they’ve gotten a quote. This review covers what Trotec actually sells, what it costs, and who should buy it instead.
The Trotec lineup at a glance
| Model | Best for | Laser source | Price |
|---|---|---|---|
| Speedy 100 | Best entry point | 40W or 50W CO2 | from ~$12,995 |
| Speedy 300 | Best mid-size production | 80W or 120W CO2 | from ~$35,090 |
| Speedy 400 | Best large-format flagship | 80W/120W CO2, optional Flexx fiber | from ~$50,490 |
| SP series | Best industrial fiber marking | Fiber | quote-only |
Trotec by the numbers
- Trotec holds a 4.5 out of 5 TrustScore from 117 Trustpilot reviews — a genuinely strong reputation, and a real contrast to Epilog’s thinner 2.5/5 from 15 reviews (see our Epilog laser review) despite both being older industrial-tier brands. Even that falls short of mid-tier Thunder Laser’s 5.0/5 from 1,430+ reviews — and Thunder ships every machine with LightBurn included, closing the software gap this review flags below.
- The Speedy 400 starts near $50,490 (per current dealer pricing) — more than 25x the price of the OMTech Polar+, the priciest Amazon-buyable desktop CO2 this site covers.
- Trotec has zero LightBurn support, with no workaround path — per LightBurn’s own hardware-compatibility forum, the company hasn’t cooperated with reverse-engineering requests, leaving only a power/speed-blind “dummy device” print option. Full Spectrum Laser shares that zero-LightBurn status, but without even Trotec’s strong 4.5/5 reputation to offset it — Full Spectrum sits at 2.0/5 from 60 reviews.
- Trotec has 17 subsidiaries and sells in 90+ countries, with 750+ employees and a 97% export rate from its Marchtrenk, Austria headquarters (per Trotec’s own company profile).
- Zero Trotec laser machines are listed on Amazon, new or used — Amazon only carries Trotec’s TroLase consumable sheets, not hardware.
1. Trotec Speedy 100 — Best Entry Point
Trotec Speedy 100 (40W/50W CO2)
- Compact bed class, Trotec's lowest-priced current configuration.
- Sold through Trotec's regional sales offices or authorized dealers only — no Amazon listing.
- Runs on Trotec's own Job Control and Ruby software; no LightBurn connection path exists.
Even Trotec’s cheapest machine starts near $12,995 for a 40W configuration — upgrading to 50W CO2 adds roughly $2,800 more. That’s already above every machine in our best CO2 laser engraver guide, and it’s before any exhaust, rotary, or software add-ons that real production work typically needs.
2. Trotec Speedy 300 — Best Mid-Size Production
Trotec Speedy 300 (80W/120W CO2)
- 726 x 432mm (29" x 17") working area, roughly double a typical desktop CO2 bed.
- 80W or 120W CO2 tube options, with Atmos exhaust-system integration.
- Fiber laser source also available on the Speedy 300 platform for metal marking.
The Speedy 300 is where Trotec’s pricing moves fully into shop-floor territory — at roughly $35,090, it costs more than ten complete OMTech laser engraver setups combined. The bed size and wattage are real production upgrades, but they’re aimed at businesses that have already outgrown anything on this site’s roundups.
3. Trotec Speedy 400 — Best Large-Format Flagship
Trotec Speedy 400 (80W/120W CO2, optional Flexx fiber)
- 1016 x 610mm working area, the largest bed in Trotec's Speedy line.
- Optional Flexx dual-source technology combines CO2 and fiber in one cabinet, adding $8,000-$12,000.
- Advanced motion control for high-throughput sign and signage production (per Trotec's product specs).
This is Trotec’s ceiling for the Speedy line — a fully configured Speedy 400 with Flexx dual-source technology can clear $60,000, more than twenty times the starting price of the xTool F1 Ultra, the closest Amazon-buyable machine that pairs fiber and a second laser source in one box.
4. Trotec SP Series — Best Industrial Fiber Marking
Trotec SP Series (Fiber)
- Fiber-only marking systems built for automotive, medical, and electronics part identification.
- Sold alongside the SpeedMarker line for high-speed industrial marking applications.
- Pricing is quote-based and configuration-dependent — not published.
If metal marking for manufacturing traceability is the whole job, the SP series skips general engraving entirely. It’s a narrower, more specialized tool than the Speedy line, built for buyers who already know their exact marking spec before they call Trotec.
Trotec has no LightBurn support — what to buy instead
If you’re shopping for a laser you can run with LightBurn, Trotec is a dead end — and not just a workaround-required dead end like some professional brands. Per LightBurn’s own hardware-compatibility documentation, there is no supported path into a Trotec machine at all; the only option is a “dummy device” print job that can’t adjust power or speed from LightBurn’s interface. Every job runs inside Trotec’s own Job Control or Ruby software.
For makers and small shops who want real CO2 cutting power with native LightBurn support and Amazon checkout, the OMTech laser engraver rankings and xTool laser engraver rankings cover genuinely Amazon-buyable CO2 options under $3,000. For a shop that wants more industrial-grade capability than a desktop machine but still wants native LightBurn Pro support, our Boss Laser review sits between Trotec’s price floor and the hobbyist tier.
OMTech Polar+ (55W CO2)
- Real desktop CO2 cutting power at roughly a fifth of the Trotec Speedy 100's starting price.
- Native LightBurn support, with full power and speed control — no dummy-device workaround.
Running an engraving business while you weigh a five-figure Trotec quote against a desktop upgrade? A free Amazon Business account unlocks quantity discounts and tax-exempt purchasing on the materials and consumables (including Trotec’s own TroLase sheets) you’ll still need regardless of which machine you land on.
The bottom line
Trotec earns its 4.5/5 Trustpilot reputation with nearly three decades of industrial-grade engineering and genuinely strong customer support — real credentials, and a sharper contrast to Epilog’s thinner review footprint than you’d expect from two similarly-priced brands. But it’s sold like industrial equipment, not a laser hobby purchase: no Amazon listing for hardware, no LightBurn path at all, and a starting price more than four times the priciest machine in our best CO2 laser engraver guide. Buy Trotec if your shop’s volume and budget justify a five-figure commitment and you’re comfortable running Trotec’s own software. Otherwise, start with our main laser engraver guide — you’ll find real production capability well below Trotec’s price floor.